| Measuring inside recess for VERTICAL BLINDS: For blinds to fit inside window recess:
-Use a metal measuring tool
-Note the exact width and length in millimetres of the window recess.
-To ensure accuracy please measure in 3 places as shown in the diagrams,
-The depth of the recess should be at least 6.5cm to allow the slats to turn.
|
|
| Measuring outside recess for VERTICAL BLINDS:
For blinds to hang outside window recess:
-Measure the exact width of the area to be covered
-Allow for extra space on either side of the recess to suit your needs.
-Measure the EXACT drop of the blind to include from the top of the head rail down to the required length.
-Please ensure accurate measurements
|
|
Measuring for ROLLER BLINDS:
Measuring for Roller blinds
-Use a metal measuring tool.
-Accurately measure the width and height of the panes in 3 places as shown in the diagram.
-This roller blind will fit neatly between the 4 frames if exact measurements are provided.
| |
|
| Measuring for velux windowNo actual measurements are needed, as the type and size of your velux loft window are detailed on a data plate. You will find the data plate for your particular type of velux window on the frame. See diagram. |
|
| Finding velux window type and size:As shown in the diagram the window type is the first 3 letters on the data plate and the window size is the 3 digits next to it. When ordering online simply key in the window type and window size separately in the drop down menus. |
|
Measuring inside recess for PANEL BLINDS:For blinds to fit inside window recess:
-Use a metal measuring tool
-Note the exact width and length in millimetres of the window recess.
-To ensure accuracy please measure in 3 places as shown in the diagrams
-Allow for an overlap between panels of at least 50mm
We will make a small deduction from your measurement to allow for your headrail.
If you have any queries regarding measuring and calculations please email us. | |
|
Measuring outside window recess for PANEL BLINDS:
For blinds to hang outside window recess:
-Measure the exact width of the area to be covered
-Allow for extra space on either side of the recess to suit your needs.
-Measure the EXACT drop of the blind to include from the top of the head rail down to the required length.
-Please ensure accurate measurements
-Allow for an overlap between panels of at least 50mm
We will make a small deduction from your measurement to allow for your headrail.
If you have any queries regarding measuring and calculations please email us.
| |
|
